modelling
¶
pyrocko.modelling.okada
¶
-
class
AnalyticalSource
(**kwargs)[source]¶ Base class for analytical source models.
-
♦
name
¶ str
, optional, default:''
-
♦
time
¶ time_float, optional, default:
0.0
Source origin time
-
♦
vr
¶ float
, optional, default:0.0
Rupture velocity [m/s]
-
♦
-
class
AnalyticalRectangularSource
(**kwargs)[source]¶ Rectangular analytical source model.
Coordinates on the source plane are with respect to the origin point given by (lat, lon, east_shift, north_shift, depth).
-
♦
strike
¶ float
, default:0.0
Strike direction in [deg], measured clockwise from north.
-
♦
dip
¶ float
, default:90.0
Dip angle in [deg], measured downward from horizontal.
-
♦
rake
¶ float
, default:0.0
Rake angle in [deg], measured counter-clockwise from right-horizontal in on-plane view.
-
♦
al1
¶ float
, default:0.0
Left edge source plane coordinate [m].
-
♦
al2
¶ float
, default:0.0
Right edge source plane coordinate [m].
-
♦
aw1
¶ float
, default:0.0
Lower edge source plane coordinate [m].
-
♦
aw2
¶ float
, default:0.0
Upper edge source plane coordinate [m].
-
♦
slip
¶ float
, optional, default:0.0
Slip on the rectangular source area [m].
-
♦
-
class
OkadaSource
(**kwargs)[source]¶ Rectangular Okada source model.
-
♦
opening
¶ float
, optional, default:0.0
Opening of the plane in [m].
-
♦
poisson
¶ float
, optional, default:0.25
Poisson’s ratio .
-
♦
lamb
¶ float
, optionalFirst Lame’ s parameter [Pa].
-
♦
shearmod
¶ float
, optional, default:32000000000.0
Shear modulus along the plane [Pa].
-
poisson
Poisson’ s ratio (if not given).
The Poisson’ s ratio can be calculated from the Lame’ parameters and using (e.g. Mueller 2007).
-
lamb
First Lame’ s parameter (if not given).
Poisson’ s ratio and shear modulus must be available to calculate the first Lame’ s parameter .
Important
We assume a perfect elastic solid with .
Through this leads to .
-
shearmod
Shear modulus (if not given).
Poisson ratio’ s must be available.
Important
We assume a perfect elastic solid with .
Through this leads to .
-
seismic_moment
¶ Scalar Seismic moment .
Code copied from Kite. It disregards the opening (as for now). We assume .
Important
We assume a perfect elastic solid with .
Through this leads to .
Returns: Seismic moment release. Return type: float
-
moment_magnitude
¶ Moment magnitude from seismic moment.
We assume .
Returns: Moment magnitude. Return type: float
-
source_patch
()[source]¶ Get source location and geometry array for okada_ext.okada input.
The values are defined according to Okada (1992).
Returns: Source data as input for okada_ext.okada. The order is northing [m], easting [m], depth [m], strike [deg], dip [deg], al1 [m], al2 [m], aw1 [m], aw2 [m]. Return type: ndarray
:(9, )
-
source_disloc
()[source]¶ Get source dislocation array for okada_ext.okada input.
The given slip is splitted into a strike and an updip part based on the source rake.
Returns: Source dislocation data as input for okada_ext.okada. The order is dislocation in strike [m], dislocation updip [m], opening [m]. Return type: ndarray
:(3, )
-
discretize
(nlength, nwidth, *args, **kwargs)[source]¶ Discretize fault into rectilinear grid of fault patches.
Fault orientation, slip and elastic parameters are passed to the sub-faults unchanged.
Parameters: Returns: Discrete fault patches.
Return type: list of
OkadaPatch
-
♦
-
class
OkadaPatch
(parent=None, *args, **kwargs)[source]¶ Okada source with additional 2D indexes for bookkeeping.
-
♦
ix
¶ int
Relative index of the patch in x
-
♦
iy
¶ int
Relative index of the patch in y
-
♦
-
make_okada_coefficient_matrix
(source_patches_list, pure_shear=False, rotate_sdn=True, nthreads=1, variant='normal')[source]¶ Build coefficient matrix for given fault patches.
The boundary element method (BEM) for a discretized fault and the determination of the slip distribution from stress drop is based on . Here the coefficient matrix is built, based on the displacements from Okada’s solution (Okada, 1992) and their partial derivatives.
Parameters: - source_patches_list (list of
OkadaSource
.) – Source patches, to be used in BEM. - pure_shear (optional, bool) – If
True
, only shear forces are taken into account. - rotate_sdn (optional, bool) – If
True
, rotate to strike, dip, normal. - nthreads (optional, int) – Number of threads.
Returns: Coefficient matrix for all source combinations.
Return type: ndarray
:(len(source_patches_list) * 3, len(source_patches_list) * 3)
- source_patches_list (list of
-
invert_fault_dislocations_bem
(stress_field, coef_mat=None, source_list=None, pure_shear=False, epsilon=None, nthreads=1, **kwargs)[source]¶ BEM least squares inversion to get fault dislocations given stress field.
Follows least squares inversion approach by Menke (1989) to calculate dislocations on a fault with several segments from a given stress field. The coefficient matrix connecting stresses and displacements of the fault patches can either be specified by the user (
coef_mat
) or it is calculated using the solution of Okada (1992) for a rectangular fault in a homogeneous half space (source_list
).Parameters: - stress_field (
ndarray
:(nsources, 3)
) – Stress change [Pa] for each source patch (asstress_field[isource, icomponent]
where isource indexes the source patch andicomponent
indexes component, ordered (strike, dip, tensile). - coef_mat (optional,
ndarray
:(len(source_list) * 3, len(source_list) * 3)
) – Coefficient matrix connecting source patch dislocations and the stress field. - source_list (optional, list of
OkadaSource
) – Source patches to be used for BEM. - epsilon (optional, float) – If given, values in
coef_mat
smaller thanepsilon
are set to zero. - nthreads (int) – Number of threads allowed.
Returns: Inverted displacements as
displacements[isource, icomponent]
where isource indexes the source patch andicomponent
indexes component, ordered (strike, dip, tensile).Return type: ndarray
:(nsources, 3)
- stress_field (
pyrocko.modelling.cracksol
¶
Analytical crack solutions for surface displacements and fault dislocations.
-
class
GriffithCrack
(**kwargs)[source]¶ Analytical Griffith crack model.
-
♦
width
¶ float
, default:1.0
Width equals to .
-
♦
poisson
¶ float
, default:0.25
Poisson ratio .
-
♦
shearmod
¶ float
, default:1000000000.0
Shear modulus [Pa].
-
♦
stressdrop
¶ numpy.ndarray
(pyrocko.guts_array.Array
), default:array([0., 0., 0.])
Stress drop array:[, , ] [].
-
a
¶ Half width of the crack in [m].
-
disloc_infinite2d
(x_obs)[source]¶ Calculation of dislocation at crack surface along x2 axis.
Follows equations by Pollard and Segall (1987) to calculate dislocations for an infinite 2D crack extended in x3 direction, opening in x1 direction and the crack extending in x2 direction.
Parameters: x_obs ( ndarray
:(N,)
) – Observation point coordinates along x2-axis. If or , output dislocations are zero.Returns: Dislocations at each observation point in strike, dip and tensile direction. Return type: ndarray
:(N, 3)
-
disloc_circular
(x_obs)[source]¶ Calculation of dislocation at crack surface along x2 axis.
Follows equations by Pollard and Segall (1987) to calculate displacements for a circulat crack extended in x2 and x3 direction and opening in x1 direction.
Parameters: x_obs ( ndarray
:(N,)
) – Observation point coordinates along axis through crack centre. If or , output dislocations are zero.Returns: Dislocations at each observation point in strike, dip and tensile direction. Return type: ndarray
:(N, 3)
-
displ_infinite2d
(x1_obs, x2_obs)[source]¶ Calculation of displacement at crack surface along different axis.
Follows equations by Pollard and Segall (1987) to calculate displacements for an infinite 2D crack extended in x3 direction, opening in x1 direction and the crack tip in x2 direction.
Parameters: Returns: Displacements at each observation point in strike, dip and tensile direction.
Return type: ndarray
:(M, 3)
or(N, 3)
-
♦