pyrocko.util

Utility functions for Pyrocko.

High precision time handling mode

Pyrocko can treat timestamps either as standard double precision (64 bit) floating point values, or as high precision floats (numpy.float128 or numpy.float96, whichever is available, see NumPy Scalars), aliased here as hpfloat. High precision time stamps are required when handling data with sub-millisecond precision, i.e. kHz/MHz data streams and event catalogs derived from such data.

Not all functions in Pyrocko and in programs depending on Pyrocko may work correctly with high precision times. Therefore, Pyrocko’s high precision time handling mode has to be actively activated by user config, command line option or enforced within a certain script/program.

The default high precision time handling mode can be configured globally with the user configuration variable use_high_precision_time. Calling the function use_high_precision_time() overrides the default from the config file. This function may be called at startup of a program/script requiring a specific time handling mode.

To create a valid time stamp for use in Pyrocko (e.g. in Event or Trace objects), use:

import time
from pyrocko import util

# By default using mode selected in user config, override with:
# util.use_high_precision_time(True)   # force high precision mode
# util.use_high_precision_time(False)  # force low precision mode

t1 = util.str_to_time('2020-08-27 10:22:00')
t2 = util.str_to_time('2020-08-27 10:22:00.111222')
t3 = util.to_time_float(time.time())

# To get the appropriate float class, use:

time_float = util.get_time_float()
#  -> float, numpy.float128 or numpy.float96
[isinstance(t, time_float) for t in [t1, t2, t3]]
#  -> [True, True, True]

# Shortcut:
util.check_time_class(t1)

Module content

class hpfloat

Alias for NumPy’s high precision float data type float128 or float96, if available.

On platforms lacking support for high precision floats, an attempt to create a hpfloat instance, raises HPFloatUnavailable.

Functions

arange2(start, stop, step[, dtype, epsilon, ...])	Return evenly spaced numbers over a specified interval.
base36decode(number)	Decode base36 endcoded positive integer.
base36encode(number[, alphabet])	Convert positive integer to a base36 string.
check_time_class(t[, error])	Type-check variable against current time handling mode.
consistency_check(list_of_tuples[, message])	Check for inconsistencies.
ctimegm(s[, format])	Convert string representing UTC time to system time.
day_start(timestamp)	Get beginning of day for any point in time.
decimate(x, q[, n, ftype, zi, ioff])	Downsample the signal x by an integer factor q, using an order n filter
decitab(n)	Get integer decimation sequence for given downampling factor.
diff_fd(n, order, dt, data)	Approximate 1st or 2nd derivative of an array.
diff_fd_1d_2o(dt, data)	Approximate first derivative of an array (second order, central FD).
diff_fd_1d_4o(dt, data)	Approximate first derivative of an array (forth order, central FD).
diff_fd_2d_2o(dt, data)	Approximate second derivative of an array (second order, central FD).
diff_fd_2d_4o(dt, data)	Approximate second derivative of an array (forth order, central FD).
ensuredir(dst)	Create directory and all intermediate path components to it as needed.
ensuredirs(dst)	Create all intermediate path components for a target path.
escape_d(s)	Backslash-escape double-quotes and backslashes.
escape_s(s)	Backslash-escape single-quotes and backslashes.
gcd(a, b[, epsilon])	Greatest common divisor.
get_threadpool_limits()	Try to import threadpoolctl.threadpool_limits, provide dummy if not avail.
get_time_dtype()	Get effective NumPy float class to handle timestamps.
get_time_float()	Get the effective float class for timestamps.
get_working_system_time_range()	Caching variant of working_system_time_range().
gform(number[, significant_digits])	Pretty print floating point numbers.
glob_filter(patterns, names)	Select names matching any of the given patterns.
gmctime(t[, format])	Get string representation from system time, UTC.
gmctime_fn(t[, format])	Get string representation from system time, UTC.
gmctime_v(t[, format])	Get string representation from system time, UTC.
gps_utc_offset(t_utc)	Time offset t_gps - t_utc for a given t_utc.
hour_start(timestamp)	Get beginning of hour for any point in time.
iter_days(tmin, tmax)	Yields begin and end of days until given time span is covered.
iter_months(tmin, tmax)	Yields begin and end of months until given time span is covered.
iter_select_files(paths[, include, exclude, ...])	Recursively select files (generator variant).
iter_years(tmin, tmax)	Yields begin and end of years until given time span is covered.
julian_day_of_year(timestamp)	Get the day number after the 1st of January of year in timestamp.
lcm(a, b)	Least common multiple.
match_nslc(patterns, nslc)	Match network-station-location-channel code against pattern or list of patterns.
match_nslcs(patterns, nslcs)	Get network-station-location-channel codes that match given pattern or any of several given patterns.
mk_decitab([nmax])	Make table with decimation sequences.
month_start(timestamp)	Get beginning of month for any point in time.
plf_integrate_piecewise(x_edges, x, y)	Calculate definite integral of piece-wise linear function on intervals.
polylinefit(x, y, n_or_xnodes)	Fit piece-wise linear function to data.
progress_beg(label)	Notify user that an operation has started.
progress_end([label])	Notify user that an operation has ended.
qjoin_d(it[, sep])	Join sequence of strings into a line, double-quoting non-trivial strings.
qjoin_s(it[, sep])	Join sequence of strings into a line, single-quoting non-trivial strings.
qsplit(s[, sep])	Split line into list of strings, allowing for quoted strings.
read_leap_seconds([tzfile])	Extract leap second information from tzdata.
reuse(x)	Get unique instance of an object.
select_files(paths[, include, exclude, ...])	Recursively select files.
setup_logging([programname, levelname])	Initialize logging.
str_to_time(s[, format])	Convert string representing UTC time to floating point system time.
str_to_time_fillup(s)	Default str_to_time() with filling in of missing values.
stt(s[, format])	Convert string representing UTC time to floating point system time.
subprocess_setup_logging_args()	Get arguments from previous call to setup_logging.
time_to_str(t[, format])	Get string representation for floating point system time.
to_time_float(t)	Convert float to valid time stamp in the current time handling mode.
tts(t[, format])	Get string representation for floating point system time.
unescape_d(s)	Unescape backslash-escaped double-quotes and backslashes.
unescape_s(s)	Unescape backslash-escaped single-quotes and backslashes.
unpack_fixed(format, line, *callargs)	Unpack fixed format string, as produced by many fortran codes.
use_high_precision_time(enabled)	Globally force a specific time handling mode.
utc_gps_offset(t_gps)	Time offset t_utc - t_gps for a given t_gps.
working_system_time_range([year_min_lim, ...])	Check time range supported by the systems's time conversion functions.
wrap(text[, line_length])	Paragraph and list-aware wrapping of text.
year_start(timestamp)	Get beginning of year for any point in time.

Classes

Anon(**dict)	Dict-to-object utility.
Sole(pid_path)	Use POSIX advisory file locking to ensure that only a single instance of a program is running.
Stopwatch()	Simple stopwatch to measure elapsed wall clock time.
TableReader(f)	Read table of space separated values from a file.
TableWriter(f)	Write table of space separated values to a file.

Exceptions

ArangeError	Raised by arange2() for inconsistent range specifications.
DownloadError	Raised when a download failed.
FractionalSecondsMissing	Exception raised by str_to_time() when the given string lacks fractional seconds.
FractionalSecondsWrongNumberOfDigits	Exception raised by str_to_time() when the given string has an incorrect number of digits in the fractional seconds part.
HPFloatUnavailable	Raised when a high precision float type would be required but is not available.
PathExists	Raised when the download target file already exists.
SoleError	Exception raised by objects of type Sole, when an concurrent instance is running.
TimeStrError	Raised for invalid time strings.
UnavailableDecimation	Exception raised by decitab() for unavailable decimation factors.
UnpackError	Exception raised when unpack_fixed() encounters an error.

setup_logging(programname='pyrocko', levelname='warning')

Initialize logging.

Parameters:

• programname – program name to be written in log

• levelname – string indicating the logging level (‘debug’, ‘info’, ‘warning’, ‘error’, ‘critical’)

This function is called at startup by most pyrocko programs to set up a consistent logging format. This is simply a shortcut to a call to logging.basicConfig().

subprocess_setup_logging_args()

Get arguments from previous call to setup_logging.

These can be sent down to a worker process so it can setup its logging in the same way as the main process.

exception DownloadError

Bases: Exception

Raised when a download failed.

exception PathExists

Bases: DownloadError

Raised when the download target file already exists.

exception HPFloatUnavailable

Bases: Exception

Raised when a high precision float type would be required but is not available.

use_high_precision_time(enabled)

Globally force a specific time handling mode.

See High precision time handling mode.

Parameters:

enabled (bool) – enable/disable use of high precision time type

This function should be called before handling/reading any time data. It can only be called once.

Special attention is required when using multiprocessing on a platform which does not use fork under the hood. In such cases, the desired setting must be set also in the subprocess.

get_time_float()

Get the effective float class for timestamps.

See High precision time handling mode.

Returns:

float or hpfloat, depending on the current time handling mode

get_time_dtype()

Get effective NumPy float class to handle timestamps.

See High precision time handling mode.

to_time_float(t)

Convert float to valid time stamp in the current time handling mode.

See High precision time handling mode.

check_time_class(t, error='raise')

Type-check variable against current time handling mode.

See High precision time handling mode.

class Stopwatch

Bases: object

Simple stopwatch to measure elapsed wall clock time.

Usage:

s = Stopwatch()
time.sleep(1)
print s()
time.sleep(1)
print s()

wrap(text, line_length=80)

Paragraph and list-aware wrapping of text.

progress_beg(label)

Notify user that an operation has started.

Parameters:

label – name of the operation

To be used in conjuction with progress_end().

progress_end(label='')

Notify user that an operation has ended.

Parameters:

label – name of the operation

To be used in conjuction with progress_beg().

exception ArangeError

Bases: ValueError

Raised by arange2() for inconsistent range specifications.

arange2(start, stop, step, dtype=<class 'float'>, epsilon=1e-06, error='raise')

Return evenly spaced numbers over a specified interval.

Like numpy.arange() but returning floating point numbers by default and with defined behaviour when stepsize is inconsistent with interval bounds. It is considered inconsistent if the difference between the closest multiple of step and stop is larger than epsilon * step. Inconsistencies are handled according to the error parameter. If it is set to 'raise' an exception of type ArangeError is raised. If it is set to 'round', 'floor', or 'ceil', stop is silently changed to the closest, the next smaller, or next larger multiple of step, respectively.

polylinefit(x, y, n_or_xnodes)

Fit piece-wise linear function to data.

Parameters:

• x,y – arrays with coordinates of data

• n_or_xnodes – int, number of segments or x coordinates of polyline

Returns:

(xnodes, ynodes, rms_error) arrays with coordinates of polyline, root-mean-square error

plf_integrate_piecewise(x_edges, x, y)

Calculate definite integral of piece-wise linear function on intervals.

Use trapezoidal rule to calculate definite integral of a piece-wise linear function for a series of consecutive intervals. x_edges and x must be sorted.

Parameters:

• x_edges – array with edges of the intervals

• x,y – arrays with coordinates of piece-wise linear function’s control points

diff_fd_1d_4o(dt, data)

Approximate first derivative of an array (forth order, central FD).

Parameters:

• dt – sampling interval

• data – NumPy array with data samples

Returns:

NumPy array with same shape as input

Interior points are approximated to fourth order, edge points to first order right- or left-sided respectively, points next to edge to second order central.

diff_fd_1d_2o(dt, data)

Approximate first derivative of an array (second order, central FD).

Parameters:

• dt – sampling interval

• data – NumPy array with data samples

Returns:

NumPy array with same shape as input

Interior points are approximated to second order, edge points to first order right- or left-sided respectively.

Uses numpy.gradient().

diff_fd_2d_4o(dt, data)

Approximate second derivative of an array (forth order, central FD).

Parameters:

• dt – sampling interval

• data – NumPy array with data samples

Returns:

NumPy array with same shape as input

Interior points are approximated to fourth order, next-to-edge points to second order, edge points repeated.

diff_fd_2d_2o(dt, data)

Approximate second derivative of an array (second order, central FD).

Parameters:

• dt – sampling interval

• data – NumPy array with data samples

Returns:

NumPy array with same shape as input

Interior points are approximated to second order, edge points repeated.

diff_fd(n, order, dt, data)

Approximate 1st or 2nd derivative of an array.

Parameters:

• n – 1 for first derivative, 2 for second

• order – order of the approximation 2 and 4 are supported

• dt – sampling interval

• data – NumPy array with data samples

Returns:

NumPy array with same shape as input

This is a frontend to the functions diff_fd_1d_2o(), diff_fd_1d_4o(), diff_fd_2d_2o(), and diff_fd_2d_4o().

Raises ValueError for unsupported n or order.

decimate(x, q, n=None, ftype='iir', zi=None, ioff=0)

Downsample the signal x by an integer factor q, using an order n filter

By default, an order 8 Chebyshev type I filter is used or a 30 point FIR filter with hamming window if ftype is ‘fir’.

Parameters:

• x – the signal to be downsampled (1D numpy.ndarray)

• q – the downsampling factor

• n – order of the filter (1 less than the length of the filter for a fir filter)

• ftype – type of the filter; can be iir, fir or fir-remez

Returns:

the downsampled signal (1D numpy.ndarray)

exception UnavailableDecimation

Bases: Exception

Exception raised by decitab() for unavailable decimation factors.

gcd(a, b, epsilon=1e-07)

Greatest common divisor.

lcm(a, b)

Least common multiple.

mk_decitab(nmax=100)

Make table with decimation sequences.

Decimation from one sampling rate to a lower one is achieved by a successive application of decimate() with small integer downsampling factors (because using large downsampling factors can make the decimation unstable or slow). This function sets up a table with downsample sequences for factors up to nmax.

working_system_time_range(year_min_lim=None, year_max_lim=None)

Check time range supported by the systems’s time conversion functions.

Returns system time stamps of start of year of first/last fully supported year span. If this is before 1900 or after 2100, return first/last century which is fully supported.

Returns:

(tmin, tmax, year_min, year_max)

get_working_system_time_range()

Caching variant of working_system_time_range().

julian_day_of_year(timestamp)

Get the day number after the 1st of January of year in timestamp.

Returns:

day number as int

hour_start(timestamp)

Get beginning of hour for any point in time.

Parameters:

timestamp – time instant as system timestamp (in seconds)

Returns:

instant of hour start as system timestamp

day_start(timestamp)

Get beginning of day for any point in time.

Parameters:

timestamp – time instant as system timestamp (in seconds)

Returns:

instant of day start as system timestamp

month_start(timestamp)

Get beginning of month for any point in time.

Parameters:

timestamp – time instant as system timestamp (in seconds)

Returns:

instant of month start as system timestamp

year_start(timestamp)

Get beginning of year for any point in time.

Parameters:

timestamp – time instant as system timestamp (in seconds)

Returns:

instant of year start as system timestamp

iter_days(tmin, tmax)

Yields begin and end of days until given time span is covered.

Parameters:

tmin,tmax – input time span

Yields:

tuples with (begin, end) of days as system timestamps

iter_months(tmin, tmax)

Yields begin and end of months until given time span is covered.

Parameters:

tmin,tmax – input time span

Yields:

tuples with (begin, end) of months as system timestamps

iter_years(tmin, tmax)

Yields begin and end of years until given time span is covered.

Parameters:

tmin,tmax – input time span

Yields:

tuples with (begin, end) of years as system timestamps

decitab(n)

Get integer decimation sequence for given downampling factor.

Parameters:

n – target decimation factor

Returns:

tuple with downsampling sequence

ctimegm(s, format='%Y-%m-%d %H:%M:%S')

Convert string representing UTC time to system time.

Parameters:

• s – string to be interpreted

• format – format string passed to time.strptime()

Returns:

system time stamp

Interpretes string with format '%Y-%m-%d %H:%M:%S', using strptime.

Note

This function is to be replaced by str_to_time().

gmctime(t, format='%Y-%m-%d %H:%M:%S')

Get string representation from system time, UTC.

Produces string with format '%Y-%m-%d %H:%M:%S', using strftime.

Note

This function is to be repaced by time_to_str().

gmctime_v(t, format='%a, %d %b %Y %H:%M:%S')

Get string representation from system time, UTC. Same as gmctime() but with a more verbose default format.

Note

This function is to be replaced by time_to_str().

gmctime_fn(t, format='%Y-%m-%d_%H-%M-%S')

Get string representation from system time, UTC. Same as gmctime() but with a default usable in filenames.

Note

This function is to be replaced by time_to_str().

exception TimeStrError

Bases: Exception

Raised for invalid time strings.

exception FractionalSecondsMissing

Bases: TimeStrError

Exception raised by str_to_time() when the given string lacks fractional seconds.

exception FractionalSecondsWrongNumberOfDigits

Bases: TimeStrError

Exception raised by str_to_time() when the given string has an incorrect number of digits in the fractional seconds part.

str_to_time(s, format='%Y-%m-%d %H:%M:%S.OPTFRAC')

Convert string representing UTC time to floating point system time.

Parameters:

• s – string representing UTC time

• format – time string format

Returns:

system time stamp as floating point value

Uses the semantics of time.strptime() but allows for fractional seconds. If the format ends with '.FRAC', anything after a dot is interpreted as fractional seconds. If the format ends with '.OPTFRAC', the fractional part, including the dot is made optional. The latter has the consequence, that the time strings and the format may not contain any other dots. If the format ends with '.xFRAC' where x is 1, 2, or 3, it is ensured, that exactly that number of digits are present in the fractional seconds.

stt(s, format='%Y-%m-%d %H:%M:%S.OPTFRAC')

Convert string representing UTC time to floating point system time.

Parameters:

• s – string representing UTC time

• format – time string format

Returns:

system time stamp as floating point value

Uses the semantics of time.strptime() but allows for fractional seconds. If the format ends with '.FRAC', anything after a dot is interpreted as fractional seconds. If the format ends with '.OPTFRAC', the fractional part, including the dot is made optional. The latter has the consequence, that the time strings and the format may not contain any other dots. If the format ends with '.xFRAC' where x is 1, 2, or 3, it is ensured, that exactly that number of digits are present in the fractional seconds.

str_to_time_fillup(s)

Default str_to_time() with filling in of missing values.

Allows e.g. ‘2010-01-01 00:00:00’ as ‘2010-01-01 00:00’, ‘2010-01-01 00’, …, or ‘2010’.

time_to_str(t, format='%Y-%m-%d %H:%M:%S.3FRAC')

Get string representation for floating point system time.

Parameters:

• t – floating point system time

• format – time string format

Returns:

string representing UTC time

Uses the semantics of time.strftime() but additionally allows for fractional seconds. If format contains '.xFRAC', where x is a digit between 1 and 9, this is replaced with the fractional part of t with x digits precision.

tts(t, format='%Y-%m-%d %H:%M:%S.3FRAC')

Get string representation for floating point system time.

Parameters:

• t – floating point system time

• format – time string format

Returns:

string representing UTC time

Uses the semantics of time.strftime() but additionally allows for fractional seconds. If format contains '.xFRAC', where x is a digit between 1 and 9, this is replaced with the fractional part of t with x digits precision.

ensuredirs(dst)

Create all intermediate path components for a target path.

Parameters:

dst – target path

The leaf part of the target path is not created (use ensuredir() if a the target path is a directory to be created).

ensuredir(dst)

Create directory and all intermediate path components to it as needed.

Parameters:

dst – directory name

Nothing is done if the given target already exists.

reuse(x)

Get unique instance of an object.

Parameters:

x – hashable object

Returns:

reference to x or an equivalent object

Cache object x in a global dict for reuse, or if x already is in that dict, return a reference to it.

class Anon(**dict)

Bases: object

Dict-to-object utility.

Any given arguments are stored as attributes.

Example:

a = Anon(x=1, y=2)
print a.x, a.y

iter_select_files(paths, include=None, exclude=None, selector=None, show_progress=True, pass_through=None)

Recursively select files (generator variant).

See select_files().

select_files(paths, include=None, exclude=None, selector=None, show_progress=True, regex=None)

Recursively select files.

Parameters:

• paths – entry path names

• include – pattern for conditional inclusion

• exclude – pattern for conditional exclusion

• selector – callback for conditional inclusion

• show_progress – if True, indicate start and stop of processing

• regex – alias for include (backwards compatibility)

Returns:

list of path names

Recursively finds all files under given entry points paths. If parameter include is a regular expression, only files with matching path names are included. If additionally parameter selector is given a callback function, only files for which the callback returns True are included. The callback should take a single argument. The callback is called with a single argument, an object, having as attributes, any named groups given in include.

Examples

To find all files ending in '.mseed' or '.msd':

select_files(paths,
    include=r'\.(mseed|msd)$')

To find all files ending with '$Year.$DayOfYear', having set 2009 for the year:

select_files(paths,
    include=r'(?P<year>\d\d\d\d)\.(?P<doy>\d\d\d)$',
    selector=(lambda x: int(x.year) == 2009))

base36encode(number, alphabet='0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ')

Convert positive integer to a base36 string.

base36decode(number)

Decode base36 endcoded positive integer.

exception UnpackError

Bases: Exception

Exception raised when unpack_fixed() encounters an error.

unpack_fixed(format, line, *callargs)

Unpack fixed format string, as produced by many fortran codes.

Parameters:

• format – format specification

• line – string to be processed

• callargs – callbacks for callback fields in the format

The format is described by a string of comma-separated fields. Each field is defined by a character for the field type followed by the field width. A questionmark may be appended to the field description to allow the argument to be optional (The data string is then allowed to be filled with blanks and None is returned in this case).

The following field types are available:

Type	Description
A	string (full field width is extracted)
a	string (whitespace at the beginning and the end is removed)
i	integer value
f	floating point value
@	special type, a callback must be given for the conversion
x	special field type to skip parts of the string

match_nslc(patterns, nslc)

Match network-station-location-channel code against pattern or list of patterns.

Parameters:

• patterns – pattern or list of patterns

• nslc – tuple with (network, station, location, channel) as strings

Returns:

True if the pattern matches or if any of the given patterns match; or False.

The patterns may contain shell-style wildcards: *, ?, [seq], [!seq].

Example:

match_nslc('*.HAM3.*.BH?', ('GR', 'HAM3', '', 'BHZ'))   # -> True

match_nslcs(patterns, nslcs)

Get network-station-location-channel codes that match given pattern or any of several given patterns.

Parameters:

• patterns – pattern or list of patterns

• nslcs – list of (network, station, location, channel) tuples

See also match_nslc()

glob_filter(patterns, names)

Select names matching any of the given patterns.

exception SoleError

Bases: Exception

Exception raised by objects of type Sole, when an concurrent instance is running.

class Sole(pid_path)

Bases: object

Use POSIX advisory file locking to ensure that only a single instance of a program is running.

Parameters:

pid_path – path to lockfile to be used

Usage:

from pyrocko.util import Sole, SoleError, setup_logging
import os

setup_logging('my_program')

pid_path =  os.path.join(os.environ['HOME'], '.my_program_lock')
try:
    sole = Sole(pid_path)

except SoleError, e:
    logger.fatal( str(e) )
    sys.exit(1)

class TableWriter(f)

Bases: object

Write table of space separated values to a file.

Parameters:

f – file like object

Strings containing spaces are quoted on output.

writerow(row, minfieldwidths=None)

Write one row of values to underlying file.

Parameters:

• row – iterable of values

• minfieldwidths – minimum field widths for the values

Each value in in row is converted to a string and optionally padded with blanks. The resulting strings are output separated with blanks. If any values given are strings and if they contain whitespace, they are quoted with single quotes, and any internal single quotes are backslash-escaped.

class TableReader(f)

Bases: object

Read table of space separated values from a file.

Parameters:

f – file-like object

This uses Pythons shlex module to tokenize lines. Should deal correctly with quoted strings.

readrow()

Read one row from the underlying file, tokenize it with shlex.

Returns:

tokenized line as a list of strings.

gform(number, significant_digits=3)

Pretty print floating point numbers.

Align floating point numbers at the decimal dot.

|  -d.dde+xxx|
|  -d.dde+xx |
|-ddd.       |
| -dd.d      |
|  -d.dd     |
|  -0.ddd    |
|  -0.0ddd   |
|  -0.00ddd  |
|  -d.dde-xx |
|  -d.dde-xxx|
|         nan|

The formatted string has length significant_digits * 2 + 6.

read_leap_seconds(tzfile='/usr/share/zoneinfo/right/UTC')

Extract leap second information from tzdata.

Based on example at http://stackoverflow.com/questions/19332902/ extract-historic-leap-seconds-from-tzdata

See also ‘man 5 tzfile’.

gps_utc_offset(t_utc)

Time offset t_gps - t_utc for a given t_utc.

utc_gps_offset(t_gps)

Time offset t_utc - t_gps for a given t_gps.

consistency_check(list_of_tuples, message='values differ:')

Check for inconsistencies.

Given a list of tuples, check that all tuple elements except for first one match. E.g. [('STA.N', 55.3, 103.2), ('STA.E', 55.3, 103.2)] would be valid because the coordinates at the two channels are the same.

escape_s(s)

Backslash-escape single-quotes and backslashes.

Example: Jack's => Jack\'s

unescape_s(s)

Unescape backslash-escaped single-quotes and backslashes.

Example: Jack\'s => Jack's

escape_d(s)

Backslash-escape double-quotes and backslashes.

Example: "Hello \O/" => \"Hello \\O/\"

unescape_d(s)

Unescape backslash-escaped double-quotes and backslashes.

Example: \"Hello \\O/\" => "Hello \O/"

qjoin_s(it, sep=None)

Join sequence of strings into a line, single-quoting non-trivial strings.

Example: ["55", "Sparrow's Island"] => "55 'Sparrow\\'s Island'"

qjoin_d(it, sep=None)

Join sequence of strings into a line, double-quoting non-trivial strings.

Example: ['55', 'Pete "The Robot" Smith'] => '55' "Pete \\"The Robot\\" Smith"'

qsplit(s, sep=None)

Split line into list of strings, allowing for quoted strings.

Example: "55 'Sparrow\\'s Island'" => ["55", "Sparrow's Island"], '55' "Pete \\"The Robot\\" Smith"' => ['55', 'Pete "The Robot" Smith']

get_threadpool_limits()

Try to import threadpoolctl.threadpool_limits, provide dummy if not avail.